Marathon Non Self Closing Fire Door Kit FDK2

Product Details

The marathon fire door kit FDK2 is produced in one standard size, for use with the various marathon sliding door sets (not included) - see Related ProductsFire rated for use on single doors, which do not require self closing
Easily operated sliding action

The Marathon Fire Door Kit FDK2 system is developed as part of a half hour sliding fire door assembly to BS 476: Part 22: 1987, and should be installed on the non-fire risk side of an aperture.

The assembly must be fitted with a solid core FD30 timber-based fire door, positively appraised by Warrington Fire Research or CERTIFIRE approved.

Assessment report WRFC No. C116602 confirms that a sliding fire door assembly, fitted in accordance with these instructions, will offer 30 minutes of fire protection in accordance with BS 476: Part 22: 1987, (ref: report Warres No. 40991)

Kit Includes
Z Section anti smoke seal
Brackets and plates to prevent door warping in fire situation
Pair of fire apron plates to replace Marathon nylon plates

For doors over 44mm thick the track needs to be packed from behind to reduce door offset. It\'s also required that intumescent fire seals be incorporated into the door framework to contain the fire within the fire area (do not use smoke seals as this will hinder self closing action) - see Related Products

To be used for fire control only, cannot be used for smoke control
Fire door not included

For the complete range of sliding door locks, handles and accessories click here